Presonus comp16
I'm thinking of buying this one...but want to know if theres anything else I should be looking at:
http://www.musiciansfriend.com/product/P reSonus-COMP16-Compressor?sku=184126
Run the compressor from your send at +4dB mono if switchable, then pesonus makes a parametric EQ, PRESONUS EQ3B, also with a mono option and run your compressor to the EQ so your tones not flat. first thing: No you wouldn’t really want to run the compressor through an AUX if you can avoid it. Depending on the mixer you have, there should be an “Insert” on the back of it. You’ll need an “Insert Cable” to connect the compressor. These also have a mono output, and they all can be directly connected in mono....
I’ve rackmounted pairs of them on 1U rack shelves using the bottom center screw, although when mounted that way they’re a little over 1U tall so I had to leave a blank rack space above them. Balanced I/O is really nice to have at this price range, and is one reason I use them instead of an FMR RNC.
5mm mic input, so i wanna know if its safe to use an xlr phantom power adapter so i can tap a good xlr mic into it. or is it just a generic thing as long as u have a mic input. Both of these XLR adapters have phantom power that is sent over the XLR cable to the condenser mic (Audio Technica AT-825 or NRG Research SA-568). for your problem, if there is no 4 pin port in your hdd, you could use an aftermarket converter of 4 pin to sata. Phantom power never gets to the camera - the XLR adapter is in the way. I bought a SATA hard drive instead of IDE and instead of sending it back and ordering an IDE I am trying to see if this could work for me at all....
